Like Us on Facebook Like Us on Instagram Follow Us on Twitter LinkedIn Facebook Instagram Twitter LinkedIn
Utility

When running a bucket to fix a downed line or to install a new one, the vehicle must remain idle. All the while, fuel is being wasted.

The ZeroRPM® Idle Mitigation System® eliminates the need to idle the engine while stationary, negating the fuel usage incurred while idling. The electric powered takeoff unit operates like the standard hydraulic pump, allowing the boom to be controlled without running the engine. This helps you save money and extends the service life of the vehicle.

Swipe Left for more systems.
UTILITY SYSTEMS
       
STANDARD SYSTEM FEATURES:IMS0HIMS1HIMS4HAC12 IMS5HAC12 IMS13HAC12
Intelligent
Vehicle Management System
Intellimetrics® Portal
*Lithium-Iron Energy Uses Factory Chassis Battery 100Ah (1.25kWh) 300Ah (3.75kWh) 400Ah (5.00kWh) 1,000Ah (12.50kWh)
Heat Through
Chassis Vents
and Controls
Hybrid Heat by Circulation Pump Hybrid Heat by Circulation Pump Hybrid Heat by Circulation Pump Hybrid Heat by Circulation Pump Hybrid Heat by Circulation Pump
A/C Through
Chassis Vents
and Controls
Automatically Starts Engine to Provide A/C Automatically Starts Engine to Provide A/C 12,000 BTU Electric Compressor 12,000 BTU Electric Compressor 12,000 BTU Electric Compressor
Auxiliary Export Voltage 12V 24V 36V 48V
ADDITIONAL SYSTEM FEATURES:          
**Fuel Operated Heater Optional 17,000 BTU Optional 17,000 BTU Optional 17,000 BTU Optional 17,000 BTU Optional 17,000 BTU
Lithium-Iron Energy Expansion Module
A/C Expansion Module    

*"Lithium-Iron" is marketing term for ZeroRPM's LiFeMnPO4 packaged energy storage systems.

**Replaces circulation pump.

Reduces Operating Costs
Conserves fuel spent while idling and lessens wear on the engine, extending the service life of the vehicle.
Protects the Environment
By reducing engine idle, fewer greenhouse gases are produced.
Improves Driver Safety and Comfort
Allows the use of heat, air conditioning, radio and auxiliary power without running the engine. Brake pedal start enables ignition without turning the key.
Multiple Recharge Options
Use the chassis alternator, optional solar panels, and various shore power scenarios that extend the availability of IMS® features.
Guided Installation
A ZeroRPM technician will provide on-site instruction to your technicians on the proper integration of the Idle Mitigation System. This includes a demonstration of all components and their functions as well as comprehensive maintenance instructions. Upon completion of the training process, your personnel will be able to perform future IMS® installations on their own.
Full-service Installation
The vehicle will be delivered to the ZeroRPM facility in Cullman, AL, where the entire installation process will be performed. A ZeroRPM representative will perform an in-service inspection showing your representative the locations of all components of the Idle Mitigation System, and will describe their operation. Our representative will then provide your personnel with a demonstration of the IMS as well as comprehensive maintenance instructions.

 

 

Proven Horsepower at ZeroRPM